Normally, eyeglasses are fitted with the optical center of the lens directly in front of the eye. If the lens is fit off-center, image displacement can occur due to induced prism. The higher the power or the further the lens is fit off-center, the higher is the induced prismatic effect.

Induced Prism

To better understand why there is induced prism, the cross-section of a plus lens can be likened to two prisms base-to-base, as the lens is thicker in the middle and thinner at the edges. Likewise, a minus lens can be likened to two prisms apex-to-apex, thinner in the middle and thicker at the edges.

This induced prism can actually be used to the advantage of the lab when prism is called for in a prescription. If the lens power is sufficient, to induce the prescribed prism, the lens can simply be cut off-center to achieve the required results. This is known as prism by decentration. If the power is insufficient, however, the prism must be cut into the surface of the lens.

A simple equation can be used to calculate the prism induced by decentration. Prentice’s rule states that prism in diopters (Δ) is equal to the decentration distance (c) in centimeters multiplied by the lens power (D).

Prentice’s Rule

Δ = cD

For a deep dive into when you can create prescribed prism by decentration and how watch: